c
2020 Sun Hydraulics 1 of 4
MODEL
U7L
ISO 05: P to T
CAVITY: T-16A
Relief, P to T
TECHNICAL DATA
Body Type Sandwich
Interface ISO 05
Body Features P to T
Stack Height 62 mm
Seal Plate Included (see notes) No
Open Cavities 1
Cavity T-16A
Model Weight 1.14 kg.
INCLUDED COMPONENTS
Part Description Quantity
500-001-014 O-Ring 5
A330-006-004 SAE Plug 1
A330-006-006 SAE Plug 1
MODIFIER
6061-T651 Aluminum, Buna-N
/11 6061-T651 Aluminum, Buna-N, Clear Anodize - Per MIL
SPEC 8625F Type II, Class I
/10 6061-T651 Aluminum, Buna-N, Black Anodize - Per MIL
SPEC 8625F Type II, Class II
/V 6061-T651 Aluminum, Viton
/16 6061-T651 Aluminum, Viton, Clear Anodize - Per MIL
SPEC 8625F Type II, Class I
/15 6061-T651 Aluminum, Viton, Black Anodize - Per MIL
SPEC 8625F Type II, Class II
/S 65-45-12 Ductile Iron, Buna-N, Chem. Black
/S3 65-45-12 Ductile Iron, Buna-N, Trivalent Clear Zinc with
Top Sealer
/Y 65-45-12 Ductile Iron, Viton, Chem. Black
/Y3 65-45-12 Ductile Iron, Viton, Trivalent Clear Zinc with
Top Sealer
sunhydraulics.com/model/
U7L
NOTES
Seal retainer plate is not required for this model.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
Model Code Example: U7L
CONFIGURATION OPTIONS
c
2020 Sun Hydraulics 2 of 4
1 2 3 4
5 6 7 8
9 10 11 12
MANIFOLD FACES
FACE GRID
Face 2
Face 5
c
2020 Sun Hydraulics 3 of 4
Face 6
Face 7
c
2020 Sun Hydraulics 4 of 4
Face 8
Face 10
